Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://repository.pdmu.edu.ua/handle/123456789/17455
Назва: Сучасна технологія покращення біосумісності протезів із полімерів за допомогою ультразвуку
Інші назви: Современная технология улучшения биосовместимости протезов из полимеров с помощью ультразвука
Modern technology of improvement biosoomability of protees from polymers ultrasonic advisory
Автори: Соколовська, Валентина Михайлівна
Цветкова, Наталія Володимирівна
Кучеренко, Т. В.
Соколовская, Валентина Михайловна
Цветкова, Наталия Владимировна
Кучеренко, Т. В.
Sokolovska, V. M.
Tsvetkova, N. V.
Kucherenko, T. V.
Дата публікації: 2018
Видавець: Полтавський державний медичний університет
Бібліографічний опис: Соколовська В. М. Сучасна технологія покращення біосумісності протезів із полімерів за допомогою ультразвуку / В. М. Соколовська, Н. В. Цветкова, Т. В. Кучеренко // Вісник проблем біології і медицини. – 2018. – Вип. 4, т. 1 (146). – С. 183–185.
Короткий огляд (реферат): Статтю присвячено проблемі токсичного впливу протезів, виготовлених з акрилових полімерів, на тканини протезного ложа і пошуку шляхів поліпшення фізико-хімічних параметрів полімерних базисних матеріалів. Для цього запропоновано новий метод полімеризації акрилатів в ультразвуковому полі, який дозволить підвищити ефективність ортопедичного лікування пацієнтів з частковою та повною втратою зубів. За результатами лабораторних досліджень встановлено, що базиси знімних протезів, виготовлених за технологією ультразвукової обробки, мають в 1,5 рази більш високу міцність, на 50% нижче рівень залишкового мономера і на 40% нижче ступінь водопоглинання. Аналіз результатів клініко-лабораторних досліджень в групах спостережень встановив достовірно кращі показники функціональної якості знімних протезів, виготовлених за допомогою полімеризації ультразвуком.
Статья посвящена проблеме токсического воздействия протезов, изготовленных из акриловых полимеров, на ткани протезного ложа и поиска путей улучшения физико-химических параметров полимерных базисных материалов. Для этого предложен новый метод полимеризации акрилатов в ультразвуковом поле, который позволит повысить эффективность ортопедического лечения пациентов с частичной и полной потерей зубов. По результатам лабораторных исследований установлено, что базисы съемных пластиночных протезов, изготовленных по технологии ультразвуковой обработки, имеют в 1,5 раза более высокую прочность, на 50% ниже уровень остаточного мономера и на 40% ниже степень водопоглощения. Анализ результатов клинико-лабораторных исследований в группах наблюдений установил достоверно лучшие показатели функциональной качества съемных пластиночных протезов, изготовленных с помощью полимеризации ультразвуком.
The article is devoted to the problem of toxic influence of prostheses made of acrylic polymers on the tissues of the prosthetic bed and the search for ways to improve the physical and chemical parameters of polymeric base materials. For this purpose a new method of polymerization of acrylates in the ultrasonic field is proposed, which will enable to increase the efficiency of orthopedic treatment of patients with partial and complete loss of teeth. According to the results of laboratory studies, the bases of removable plate prostheses, which are manufactured using ultrasound technology, have 1.5 times higher strength, a 50% lower residual monomer level and a 40% lower water absorption rate. Investigation of the temperature regime of the mucous membrane is one of the indicators of violation of trophic tissues, the severity of pathological changes, the process of adaptation to prosthetics. To study the effectiveness of the proposed technology for the manufacture of bases of removable plate prosthesis, the parameters of the temperature of the mucous membrane of the prosthetic bed in the patients’ groups during the adaptation to the prostheses and at different periods of their use were studied. For example, after one month of use of prosthesis, the temperature indices in patients with ultrasound prostheses remained unchanged. Then, as in patients who used dentures manufactured using traditional technology, temperature indices indicated an inflammatory reaction to prosthetics and a violation of the processes of thermoregulation. This was confirmed by microbiological research: in such conditions the high temperature increased the number of microorganisms both on the mucous membrane and on the basis of the prosthesis. The analysis of the obtained results shows that under the basis of prosthetics, which are manufactured using ultrasound technology, a lower reaction of inflammation, no violation of thermoregulation, a better process of self-cleaning of the mucous membrane. The obtained results of thermometric studies make it possible to conclude that complete removable plate prostheses made by the polymerization technology of the base material in the ultrasound field, due to the lower thickness of the basis, do not violate the processes of trophic tissues, since they produce less pressure on the substrate tissues; do not violate the thermoregulation. All this contributes to a better adaptation to prosthetics, reduces the negative effect of bases on the tissues of the prosthetic bed. The analysis of the results of clinical and laboratory studies in the observation groups has established the best indicators of the functional quality of removable plate prostheses, made by ultrasonic polymerization.
Ключові слова: протезний стоматит
базис протеза
полімерні матеріали
водопоглинання
знімний пластинковий протез
полімеризація
ультразвук
протезный стоматит
базис протеза
полимерные материалы
водопоглощение
съемный пластиночный протез
полимеризация
ультразвук
prosthetic stomatitis
prosthetic base
polymeric materials
water absorption
removable plate prosthesis
polymerization
ultrasound
УДК: 616.311:617.463
ISSN: 2523-4110
2077-4214
DOI: 10.29254/2077-4214-2018-4-1-146-191-194
URI: http://repository.pdmu.edu.ua/handle/123456789/17455
Розташовується у зібраннях:Вісник проблем біології і медицини, Випуск 4, Том 1 (146)

Файли цього матеріалу:
Файл Опис РозмірФормат 
Modern_technology.pdf139,69 kBAdobe PDFПереглянути/Відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.