Перегляд за Автор "Nidzelskiy, M. Ya."
Зараз показуємо 1 - 3 з 3
Результатів на сторінці
Налаштування сортування
Документ Condition and structural organization of the glandular area mucous membrane of albino rat hard palate under the 30-day-long effect of acrylic monomer(Українська медична стоматологічна академія, 2020) Khilinich, Ye. S.; Starchenko, І.І.; Davydenko, V. Yu.; Nidzelskiy, M. Ya.; Davydenko, G. М.; Хілініч, Євгеній Сергійович; Старченко, Іван Іванович; Давиденко, Вадим Юрійович; Нідзельський, Михайло Якович; Давиденко, Ганна Миколаївна; Хилинич, Евгений Сергеевич; Старченко, Иван Иванович; Давыденко, Вадим Юрьевич; Нидзельский, Михаил Яковлевич; Давыденко, Анна НиколаевнаCurrently, the problem of the impact of removable laminar denture frames, including residual monomer, on the condition of the minor salivary glands, which play an important role in maintaining the balance in the oral cavity, remains poorly understood. Therefore, the paper was aimed at the experimental study of the effect of the monomer of the base acrylic resin “Ftoraks” on the condition and structural organization of the salivary glands of hard palate of albino rats. The findings of the study show that the monomer disrupts homeostasis of the oral cavity and causes irritation of the mucous membrane, manifested by dystrophy of the epithelial plate on day 30 of the experiment, as well as thickening of the corneal layer due to hypertrophy, which indicates the presence of hyperkeratosis. On day 30 of the experiment, thickening of the entire epithelial layer and the phenomena of hyper- and diskeratosis was detected in the experimental group; the phenomena of plethora, high lymphocyte, neutrophilic and eosinophilic leukocyte count were noted in the lamina propria of the mucous membrane and growing of relative amount of connective tissue can be regarded as the manifestation of a compensatory-adaptive reaction in response to the action of the monomer. 30-day-long experimental studies have shown insignificant effect of the monomer of the base acrylic resin “Ftoraks” on the cumulative size of the salivary glands in the submucous layer of the hard palate. Since the average recommended period of use of full removable laminar dentures is 3-5 years, it was considered necessary to continue the experiment and investigate the effect of the monomer of the base acrylic resin “Ftoraks” on the condition and structural organization of salivary glands of the hard palate of albino rats after 3, 6 and 9 months to further extrapolate the findings of the study to the human body.Документ Обґрунтування використання стоматологічного реклінатора для лікування ронхопатії та синдрому обструктивного апное(Українська медична стоматологічна академія, 2019) Ксенжук, Маргарита Анатоліївна; Нідзельський, Михайло Якович; Кузнецов, Віктор Васильович; Ксенжук, Маргарита Анатольевна; Нидзельский, Михаил Яковлевич; Кузнецов, Виктор Васильевич; Ksenzhuk, M. A.; Nidzelskiy, M. Ya.; Kuznetsov, V. V.Храп та його ускладнення – синдром обструктивного апное посідають вагоме місце серед актуальних проблем сучасної медицини. Про актуальність даної проблеми свідчить висока поширеність. За даними останніх досліджень синдром обструктивного апное сну уражає чоловіків – 10% віком 3049 років та 17% віком 50-70 років, жінок – 3% віком 30-49 років та 9% віком 50-70 років, і частота виявлення його в останні роки прогресивно зростає. До виникнення храпу та синдрому обструктивного апное, найчастіше призводять такі порушення зубощелепної системи: дистальне положення нижньої щелепи; звуження верхньої щелепи, високе готичне піднебіння, дисфункція скроневонижньощелепного суглоба; макроглосія. Також, підвищена вірогідність наявності обструктивного апное у пацієнтів з гострим кутом мандибулярної площини і недорозвиненим підборіддям. Всі ці причини звужують просвіт дихальних шляхів та зменшують об`єм порожнини рота. В залежності від причин виникнення храпу та синдрому обструктивного апное існують різні методи їх лікування. У світовій практиці та країнах західної Європи, в протоколі лікування та профілактики хворих на храп та обструктивне апное широко використовують внутрішньоротові апарати. У 2000 році в Американській академії медицини сну був створений розділ оральних приладів, що використовують для лікування храпу та синдрому обструктивного апное. Всі вони мають, як переваги, так і низку недоліків. До недоліків від користування внутрішньоротових апаратів для лікування та профілактики храпу та обструктивного апное відносяться: біль у скронево-нижньощелепному суглобі, надмірне слиновиділення або навпаки, сухість у порожнині рота, зубний біль та безсоння. Мета дослідження: Удосконалити апарати для лікування храпу та синдрому обструктивного апное. Висновки. Нами був запропонований та розроблений апарат для профілактики храпу та апное, який функціонує за рахунок фіксації фізіологічного прикусу у стані спокоюДокумент Порівняльна характеристика рівня залишкового мономеру в базисах знімних протезів із акрилових пластмас, виготовлених за різними технологіями полімеризації(Вищий державний навчальний заклад України «Українська медична стоматологічна академія», 2014) Нідзельський, Михайло Якович; Давиденко, Вадим Юрійович; Давиденко, Ганна Миколаївна; Кузнецов, Віктор Васильович; Соколовська, Валентина Михайлівна; Nidzelskiy, M. Ya.; Davydenko, V. Yu.; Davydenko, H. M.; Kuznetsov, V. V.; Sokolovskaya, V. M.Багаторічний досвід використання акрилових композицій виявив ряд недоліків цих матеріалів: присутність в базисі залишкового мономеру - метилметакрилату; недостатньо високі міцностні властивості і, як наслідок цього, - невисока довговічність акрилових протезів. Сам полімер є нешкідливим матеріалом, в той же час мономер, який завжди присутній у полімері, може спричиняти негативну та шкідливу дію на організм людини. В статті проведено порівняння показників рівня залишкового мономеру у базисах протезів із акрилових пластмас, виготовлених за різними технологіями полімеризації. Встановлено достовірні відмінності показників рівня залишкового мономеру між зразками, виготовленими за класичною методикою з полімеризацією на водяній бані та зразками, які виготовлені за технологією електромагнітної обробки і з використанням ультразвуку. Многолетний опыт использования акриловых композиций выявил ряд недостатков этих материалов: присутствие в базисе остаточного мономера - метилметакрилата; недостаточно высокие прочностные свойства и, как следствие этого, - невысокая долговечность акриловых протезов. Сам полимер является безвредным материалом, в то же время мономер, который всегда присутствует в полимере, может оказывать негативное и вредное действие на организм человека. В статье проведено сравнение показателей уровня остаточного мономера в базисах протезов из акриловых пластмасс, изготовленных по разным технологиям полимеризации. Установлены достоверные отличия показателей уровня остаточного мономера между образцами, изготовленными за классической методикой с полимеризацией на водяной бане и образцами, которые изготовлены по технологии электромагнитной обработки и с использованием ультразвука. Optimal recovery of lost functions of dentoalveolar system in full or partial secondary adentia is one of the important tasks of prosthetic dentistry. The effectiveness of orthopedic treatment is largely determined by the properties of the base materials used in the manufacturing of removable dentures. Long-term experience of application of acrylic compositions has revealed a number of disadvantages of these materials: the presence of residual monomer methyl methacrylate in the denture base; not enough high strength properties and, consequently, low durability of acrylic dentures. The polymer itself is harmless material, but at the same time, the monomer, which is always presented in the polymer, can have negative and harmful effects on the human body. Removable laminar dentures, made of acrylates, can be manufactured by different technologies of polymerization: conventional, according to Gerner, i. e., polymerization in water bath; the dry method of polymerization, polymerization underpressure; microwaves. A number of studies are dedicated to manufacturing of removable dentures by these methods. However, the problem of residual monomer has not been solved yet. Some authors report that, when the conditions of polymerization in conventional method of dentures’ manufacturing, free monomer remains up to 0.2%. At the same time, according to other authors this index constitutes up to 0.5%. It should be noted that reports of many scientists as for the content of residual monomer differ significantly. In the investigations of residual monomer concentrations in dentures’ bases, manufactured in the apparatus for cast pressing, Kindiy D. D. (1999) found that it constituted 0. 23%, whereas by using the conventional method it constituted 0. 33%. To remove disadvantages that diminish functional usefulness and durability of dentures it is necessary to develop and improve the technologies which allow achieving high precision in the manufacturing of dental prostheses, improvement of polymerization, in particular. The paper considers the comparison of indices of residual monomer content in acrylic denture bases, manufactured by different polymerization technologies. Studies have shown that the bulk of the monomer goes to water during the first month of exposure. The significant differences in indices of residual monomer content between samples, made by the conventional technique with polymerization in water bath, and the samples, made by technology of electromagnetic processing and ultrasound. The highest content of free monomer has been found in samples, made by conventional technology of polymerization, i. e., in water bath, which constituted 0.28%. The lowest content of 0. 1 % has been found in the samples that were produced with the use of electromagnetic field with intensity of 80 Oe. Residual monomer concentration in samples made with the use of electromagnetic processing is 2 times less. In 3 months the content of residual monomer became a little low, but the difference was not significant as compared to the first month of the exposure, except the indices in the 2 and 3 groups. This indicates once again that the maximum content of free monomer remains in plastic material in the first period after its polymerization and all activities should be aimed at prevention of complications, caused by its negative effect on the tissues of prosthetic field and the body as a whole.