Перегляд за Автор "Kindiy, Dmytro"
Зараз показуємо 1 - 7 з 7
Результатів на сторінці
Налаштування сортування
Документ Biological compatibility of metal structures of dentures made from multiple melted alloys(2022) Hasiuk, Petro; Kindiy, Dmytro; Radchuk, Volodymyr; Kindiy, Viktor; Demkovych, Andrii; Yarkoviy, Vitaliy; Гасюк, Петро Анатолійович; Кіндій, Дмитро Данилович; Радчук, Володимир Богданович; Кіндій, Віктор Данилович; Демкович, Андрій Євгенович; Ярковий, Віталій ВасильовичThe issue of reuse of metal alloys in dentistry raises debatable questions about their impact on the human body. The aim of the study was the evaluation of the biocompatibility of metal structures of dentures made from cobalt-chromium and nickelchromium alloys Remanium GM 700 and Remanium CSe after repeated vacuum remelting. Materials and methods. Clinical study and treatment with fixed prostheses based on Remanium GM 700 and Remanium CSe were performed among 120 patients aged 25-60 years. The biocompatibility of the above-mentioned denture designs with oral tissues was studied. Results. Prostheses made from Remanium GM 700 and Remanium CSe alloys are biologically indifferent, which is confirmed by the indicators of alkaline and acid phosphatase activity within the physiological norm. Regardless of the number of remelts, these alloys do not cause dysbacteriosis. The obtained results do not depend on the terms of observation, which indicates the safe use of remolten alloys for dental prosthetics. Conclusions. The investigated alloys are biocompatible and can be used for the manufacture of solid structures of denturesДокумент Characteristics of metal alloys properties for dental casting after their repeated remelting(Aluna Publishing, 2021-10) Hasiuk, Petro; Kindiy, Viktor; Radchuk, Volodymyr; Kindiy, Dmytro; Dzetsiukh, Tetiana; Korol, Dmytro; Гасюк, Петро Анатолійович; Кіндій, Віктор Данилович; Кіндій, Дмитро Данилович; Король, Дмитро МихайловичThe aim: To study clinical and experimental substantiation of the possibility of using cobalt-chromium and nickel-chromium alloys after repeated remelting for non-removable one-piece prosthetics. Materials and methods: Experimental studies of Remanium GM 700 and Remanium CSe dental alloys have been carried out. To study the physical and mechanical properties of alloys, samples were obtained by sequential six-fold remelting in a Tiegelschleuder TS casting dental unit manufactured by Degussa. All samples were subjected to chemical analysis and metallographic studies by methods generally known in metallurgy, which included studies of microhardness, elasticity, tensile deformation, bending deformation and alloy structure after repeated remelting. Results: Thus, the obtained results of the chemical, physicomechanical and structural properties of the remelts indicate that the Remanium GM 700 and Remanium СSe alloys can be reused many times for the manufacture of one-piece orthopedic structures in that they are identical with certified alloys. Conclusions: In terms of structure, qualitative and quantitative composition of elements, physical and technological properties, the Remanium GM 700 and Remanium CSe alloys have been repeatedly remelted meet the requirements of materials used in biologically active environments of the patient’s body. High-quality and cost-effective remelted multiple times Remanium GM 700 and Remanium CSe alloys can be recommended for use in practical prosthetic dentistry six times.Документ Comparative analysis of endurance cements for the fixation of non-removable orthopedic constructions under the action of cyclic compression(Aluna Publishing, 2022-04) Hasiuk, Petro; Odzhubeiska, Olga; Vorobets, Anna; Korol, Dmytro; Dzetsiukh, Tetiana; Kindiy, Dmytro; Гасюк, Петро Анатолійович; Оджубейська, Ольга Дмитрівна; Воробець, Анна Богданівна; Король, Дмитро Михайлович; Дзецюх, Тетяна Ігорівна; Кіндій, Дмитро ДаниловичThe aim: To conduct studies of the physical and mechanical properties of cements for fixation, namely the duration of cement samples under cyclic compression. Materials and methods: We have conducted a study of 6 cements for permanent fixation of fixed structures of dentures. To study the duration of cements under cyclic compression, a special stand was used, which allows testing samples for cyclic compression with a load frequency of 5.4 Hz or 324 cycles per minute and an increase in compression in a cycle from 10 to 100 kg/s. Results: Comparative analysis of the mechanical properties in compression of dental cements for permanent fixation showed that the obtained deformation curves differ significantly in each of the cement samples used in the study. Conclusions: The results of the study of the physical and mechanical properties of cements indicate that the most optimal complex of properties is possessed by the zincphosphate cement Unitsem and glass ionomer cements Cemion and Fuji I. This is most clearly confirmed when studying the duration of cement samples under cyclic compression, which simulates a real situation.Документ Results of videokinesiography in patients with a complicated course of acute cerebrovascular disorder by hemitype in the recovery period(Polski Merkuriusz Lekarski, Polish Medical Journal, 2022-05) Toncheva, Kateryna; Korol, Dmytro; Zubchenko, Sergiy; Yarkoviy, Vitaliy; Kindiy, Dmytro; Тончева, Катерина Дмитрівна; Король, Дмитро Михайлович; Зубченко, Сергій Григорович; Ярковий, Віталій Васильович; Кіндій, Дмитро ДаниловичThe aim of the research was to examine the features of articulatory activity in the mandible during chewing at the stages of orthopedic rehabilitation in patients with complicated acute cerebrovascular disorder with the neurological deficit by hemitype during the prosthetics with removable orthopedic appliances.Документ Кобальто-хромовий зуботехнічний сплав з додаванням церію(Полтавський державний медичний університет, 2023-02-17) Король, Дмитро Михайлович; Тончева, Катерина Дмитрівна; Кіндій, Дмитро Данилович; Ярковий, Віталій Васильович; Кіндій, Віктор Данилович; Korol, Dmytro; Toncheva, Kateryna; Kindiy, Dmytro; Yarkoviy, Vitaliy; Kindii, VictorУ рамках даної технології у зуботехнічний сплав, що містить кобальт, хром, молібден, нікель, залізо, марганець, вуглець, кремній додатково вводять церій у кількості 0,01-0,03%. Запропонований сплав виготовляють електрошлаковою плавкою електродів, що витрачаються, виготовлених з порошків названих вище складових компонентів шляхом пресування.Документ Пристрій для фотореєстрації тестових зразків для визначення жувальної ефективності(Полтавський державний медичний університет, 2023-02-06) Король, Дмитро Михайлович; Тончева, Катерина Дмитрівна; Кіндій, Дмитро Данилович; Ярковий, Віталій Васильович; Малюченко, Микола Миколайович; Korol, Dmytro; Toncheva, Kateryna; Kindiy, Dmytro; Vitaliy, Yarkoviy; Malyuchenko, MykolaУ рамках даної технології розроблено портативний пристрій, що здатний із високою точністю збирати, накопичувати та аналізувати одержану інформацію при визначенні показників жувальної ефективності в динаміці ортопедичного лікування, а також має високу економічну рентабельність, простоту і доступність для дослідників.Документ Спосіб седиментаційного визначення жувальної ефективності тестового матеріалу жувальної проби(Полтавський державний медичний університет, 2023-04-24) Король, Дмитро Михайлович; Тончева, Катерина Дмитрівна; Кіндій, Дмитро Данилович; Зубченко, Сергій Григорович; Калашніков, Дмитро Вікторович; Kalashnikov, Dmytro; Korol, Dmytro; Toncheva, Kateryna; Kindiy, Dmytro; Zubchenko, SergiyУ рамках даної технології розроблено спосіб проведення жувальної проби тестовим матеріалом агар-агар та визначення жувальної ефективності за підрахунком розміру подрібнених частинок тестового матеріалу фракцій 50-500 pixel2 та 500- 1000 pixel2 з наступною фотореєстрацією їх у програмі Image J та подальшою статистичною обробкою отриманих даних.