Кафедра пропедевтики ортопедичної стоматології
Постійне посилання на фонд
Переглянути
Перегляд Кафедра пропедевтики ортопедичної стоматології за Назва
Зараз показуємо 1 - 20 з 219
Результатів на сторінці
Налаштування сортування
Документ Analysis of denture base impact on the denture foundation area tissues(Українська медична стоматологічна академія, 2020) Kalashnikov, D. V.; Kindiy, D. D.; Korol, D. M.; Kindiy, V. D.; Калашніков, Дмитро Вікторович; Кіндій, Дмитро Данилович; Король, Дмитро Михайлович; Кіндій, Віктор ДаниловичThe article presents the results of the study of the dental base impact on the denture foundation area tissues. The study was conducted in 149 patients aged 41 to 74 years. Removable partial laminar dentures for the upper and lower jaws were made of plastics "Ftorax" and "Etacryl-02" by three technologies: in a "water bath", in a dry polymerizer under the pressure and in an advanced injection molding machine. The results obtained allow us to recommend the technology of manufacturing removable partial laminar dentures in the advanced injection molding machine for using in dental orthopedics clinic.Документ Assessment of indicators of bone tissue resorption in patients with chronic generalized periodontitis according to the data of cone-beam computer tomography(Тернопільський національний медичний університет, 2023-02-01) Hasiuk, P. A.; Korobeinikova, Yu. L.; Piasetska, L. V.; Korobeinikov, L. S.; Demkovych, A. Ye.; Kalashnikov, D. V.; Zubchenkо, S. G.; Гасюк, Петро Анатолійович; Коробейнікова, Юлія Леонідівна; Коробейніков, Леонід Сергійович; Калашніков, Дмитро Вікторович; Зубченко, Сергій ГригоровичSummary. One of the criteria for assessing the degree of pathological changes in periodontal tissues is resorption of the bone tissue of the alveolar process of the jaw. However, changes from the vestibular and oral surfaces on a panorama or focused intraoral x-rays are covered by the shadow of the teeth and objectively do not provide an opportunity for accurate diagnosis of pathological changes in periodontal tissues. The only technique that makes it possible to obtain a three-dimensional image of the studied area with minimal exposure is cone-beam computed tomography (CBCT). The aim of this study – to evaluate bone tissue resorption in the area of frontal teeth of patients with chronic generalized periodontitis according to CBCT data. Materials and Methods. The study analyzed the resorption of bone tissue in the area of frontal teeth (80 teeth) in patients with chronic generalized periodontitis. The average age of the subjects was 34–44 years. The EzD2009 software and the basic interface to work in the main MPR (multiplenar reformation) option – multiplenar visualization of a threeplane image was used for CBCT analysis, with adjustment of the thickness of the selected layer (TH) from 0.03 mm to 3.0 cm. Results and Discussion. The results of cone-beam computed tomography revealed a significant difference in the bone resorption rates of the alveolar process of the jaw from the medial, distal, and vestibulo-oral sides. Conclusions. This indicates that a detailed study of this indicator is an essential factor in the diagnosis of periodontal changes in patients with chronic generalized periodontitis.Документ Basic principles of arch prosthetics(ФОП-Мирон І.А., 2017) Korol, D. M.; Korol, M. D.; Kindiy, D. D.; Korobeinikov, L. S.; Odzhubeiskaia, O. D.; Kozak, R. V.; Maliuchenko, T. P.; Kindiy, V. D.; Dorubets, A. D.; Король, Дмитро Михайлович; Король, Михайло Дмитрович; Кіндій, Дмитро Данилович; Коробейніков, Леонід Сергійович; Оджубейська, Ольга Дмитрівна; Козак, Руслан Васильович; Малюченко, Тетяна Петрівна; Кіндій, Віктор ДаниловичThe development of prosthetic dentistry provides improvement of different dental prostheses to increase the level of dental care efficiency. The manual is aimed to provide comprehension of the present day views on the arch prostheses production considering theoretical and practical value of classical techniques. The manual contains the programme material on prosthetic dentistry educational discipline and concerns the issues discussed in the section «Arch prosthetics». The current methods of arch prostheses fixation are widely covered in the manual as well as planning approaches and prosthesis design choice. Particular attention is paid to the basic technological stages of prostheses manufacturing. The text is illustrated with the color drawings improving the presented material comprehension, the list of questions is directed on self-control of acquired knowledge. The authors will be sincerely grateful to colleagues for constructive remarks and useful suggestions in improving the presented material. Authentic translation from Ukrainian Language.Документ Biological compatibility of metal structures of dentures made from multiple melted alloys(2022) Hasiuk, Petro; Kindiy, Dmytro; Radchuk, Volodymyr; Kindiy, Viktor; Demkovych, Andrii; Yarkoviy, Vitaliy; Гасюк, Петро Анатолійович; Кіндій, Дмитро Данилович; Радчук, Володимир Богданович; Кіндій, Віктор Данилович; Демкович, Андрій Євгенович; Ярковий, Віталій ВасильовичThe issue of reuse of metal alloys in dentistry raises debatable questions about their impact on the human body. The aim of the study was the evaluation of the biocompatibility of metal structures of dentures made from cobalt-chromium and nickelchromium alloys Remanium GM 700 and Remanium CSe after repeated vacuum remelting. Materials and methods. Clinical study and treatment with fixed prostheses based on Remanium GM 700 and Remanium CSe were performed among 120 patients aged 25-60 years. The biocompatibility of the above-mentioned denture designs with oral tissues was studied. Results. Prostheses made from Remanium GM 700 and Remanium CSe alloys are biologically indifferent, which is confirmed by the indicators of alkaline and acid phosphatase activity within the physiological norm. Regardless of the number of remelts, these alloys do not cause dysbacteriosis. The obtained results do not depend on the terms of observation, which indicates the safe use of remolten alloys for dental prosthetics. Conclusions. The investigated alloys are biocompatible and can be used for the manufacture of solid structures of denturesДокумент Characteristics of cellular composition of periodontal pockets(2016) Hasiuk, P.; Hasiuk, N.; Kindiy, D. D.; Kalashnikov, D. V.; Zubchenko, S. G.; Ivanchyshyn, V. V.; Кіндій, Дмитро Данилович; Калашніков, Дмитро Вікторович; Зубченко, Сергій ГригоровичPurpose.The emergence and development of inflammatory periodontal disease in young people is an urgent problem of today's periodontology, and requires a development of new methods that would give an opportunity not only to diagnose but also prognosis of periodontitis course in a given patients contingent. Results. Cellular structure periodontal pockets is presented by hematogenous and epithelial cells. Our results are confirmed by several studies of redecessors, and show that the penetration of periodontal pathogens leads to formation in periodontal tissue of a highly active complex compounds - cytokines that are able to modify the activity of neutrophils and reduce their specific antibacterial properties. Cytokines not only adversely affect the periodontal tissues, but cause further activation of cells that synthesized them, inhibit tissue repair and process of resynthesis of connective tissue by fibroblasts. Conclusion. Neutrophilic granulocytes present in each of the types of smear types, but their functional status and quantitative composition is different. The results of our cytological study confirmed the results of immunohistochemical studies, and show that in generalized periodontitis, an inflammatory cellular elements with disorganized epithelial cells and connective tissue of the gums and periodontium, and bacteria form specific types of infiltration in periodontal tissues.Документ Characteristics of metal alloys properties for dental casting after their repeated remelting(Aluna Publishing, 2021-10) Hasiuk, Petro; Kindiy, Viktor; Radchuk, Volodymyr; Kindiy, Dmytro; Dzetsiukh, Tetiana; Korol, Dmytro; Гасюк, Петро Анатолійович; Кіндій, Віктор Данилович; Кіндій, Дмитро Данилович; Король, Дмитро МихайловичThe aim: To study clinical and experimental substantiation of the possibility of using cobalt-chromium and nickel-chromium alloys after repeated remelting for non-removable one-piece prosthetics. Materials and methods: Experimental studies of Remanium GM 700 and Remanium CSe dental alloys have been carried out. To study the physical and mechanical properties of alloys, samples were obtained by sequential six-fold remelting in a Tiegelschleuder TS casting dental unit manufactured by Degussa. All samples were subjected to chemical analysis and metallographic studies by methods generally known in metallurgy, which included studies of microhardness, elasticity, tensile deformation, bending deformation and alloy structure after repeated remelting. Results: Thus, the obtained results of the chemical, physicomechanical and structural properties of the remelts indicate that the Remanium GM 700 and Remanium СSe alloys can be reused many times for the manufacture of one-piece orthopedic structures in that they are identical with certified alloys. Conclusions: In terms of structure, qualitative and quantitative composition of elements, physical and technological properties, the Remanium GM 700 and Remanium CSe alloys have been repeatedly remelted meet the requirements of materials used in biologically active environments of the patient’s body. High-quality and cost-effective remelted multiple times Remanium GM 700 and Remanium CSe alloys can be recommended for use in practical prosthetic dentistry six times.Документ Comparative analysis of endurance cements for the fixation of non-removable orthopedic constructions under the action of cyclic compression(Aluna Publishing, 2022-04) Hasiuk, Petro; Odzhubeiska, Olga; Vorobets, Anna; Korol, Dmytro; Dzetsiukh, Tetiana; Kindiy, Dmytro; Гасюк, Петро Анатолійович; Оджубейська, Ольга Дмитрівна; Воробець, Анна Богданівна; Король, Дмитро Михайлович; Дзецюх, Тетяна Ігорівна; Кіндій, Дмитро ДаниловичThe aim: To conduct studies of the physical and mechanical properties of cements for fixation, namely the duration of cement samples under cyclic compression. Materials and methods: We have conducted a study of 6 cements for permanent fixation of fixed structures of dentures. To study the duration of cements under cyclic compression, a special stand was used, which allows testing samples for cyclic compression with a load frequency of 5.4 Hz or 324 cycles per minute and an increase in compression in a cycle from 10 to 100 kg/s. Results: Comparative analysis of the mechanical properties in compression of dental cements for permanent fixation showed that the obtained deformation curves differ significantly in each of the cement samples used in the study. Conclusions: The results of the study of the physical and mechanical properties of cements indicate that the most optimal complex of properties is possessed by the zincphosphate cement Unitsem and glass ionomer cements Cemion and Fuji I. This is most clearly confirmed when studying the duration of cement samples under cyclic compression, which simulates a real situation.Документ Comparative evaluation of histotoxicity indicators of metal alloys for the manufacture of metal ceramic dental constructions(Aluna Publishing, 2021-09) Hasiuk, Petro A.; Ramus, Mykhailo; Vorobets, Anna; Tkachenko, Iryna; Dzetsiukh, Tetiana; Kalashnikov, Dmytro; Rosolovska, Svitlana; Гасюк, Петро Анатолійович; Рамусь, Михайло Олександрович; Калашніков, Дмитро Вікторович; Ткаченко, Ірина МихайлівнаThe aim: To carry out a comparative assessment of metal alloys for the manufacture of metal-ceramic constructions of dentures by determining the indicator of their histotoxicity. Materials and methods: To identify the effect of metal alloys on cobalt and nickel bases on the tissue of organism, we carried out an experimental-morphological study of standard samples of metal alloys “Shot-alloy”, “Remanium-2000”, “Cerium”, “Dent-NCB”, “Cellite-N”. Results: A careful histological analysis of the capsules formed around the metal alloy samples during two periods of the experiment showed that the healing time of the subcutaneous tissue was not the same. The most complete healing, that is, the formation of mature fibrous connective tissue, occurred during the implantation of the cobalt based alloy “Remanium-2000” and the capsule formed at the end of the experiment around the implanted sample from the “Shot-alloy” alloy, and during the implantation of the “Cerium” alloy, healing the wound surface and the formation of a connective tissue capsule occurs fully than in previous cases. Conclusions: The analysis of the performed experiment testifies in favor of the point of view that the speed and quality of healing of damaged subcutaneous tissue upon the introduction of implanted research alloys depend largely on the individual chemical components that make up the alloys, or on their combination.Документ Cone-beam computed tomography in dental practice: Literature review and own observations(Journal of International Dental and Medical Research, 2023-10-06) Korobeinikova, Yu. L.; Korobeinikov, L. S.Abstract A cone-beam computed tomography (CBCT) is a diagnostic method that provides radiographic visualization with an accurate three-dimensional (3D) image of hard tissue structures. CBCT is a modern diagnostic method in dentistry that promises many advantages in the near future, and the possibilities of its use are almost unlimited, provided that it is prescribed reasonably and appropriately. The purpose of this article is the review the possibilities of using cone-beam computerized tomography in dental practice, taking into account the advantages and disadvantages, with illustration of specific clinical cases. The main cases of CBCT usage in dentistry are endodontics, implant planning, orthodontics and orthopedics, diseases of the temporomandibular joint. The article is justified on the basis of literary sources and on the basis of own observations of the use of KPKT in various fields of dentistry, the most significant examples of the use of this diagnostic method, limitations in certain cases and prospects for future use are given. CBCT method is of primary importance for diagnosis, treatment planning and direct selection of the root canal treatment method. It also has undeniable advantages in diagnosing complications in endodontics. CBCT should not be the «gold standard» in orthodontic practice, but should be used only in cases of difficult diagnosis or treatment optimization. CBCT may be justified for preoperative diagnosis, planning, and postoperative rehabilitation, on condition of optimization hardwaredependent, specific, and nonspecific factors that may affect the quality of diagnosis. CBCT may be justified for preoperative diagnosis, planning, and postoperative rehabilitation, on condition of optimization hardware-dependent, specific, and nonspecific factors that may affect the quality of diagnosis. It is also important to use different modes, viewing images in different planes in each case, but with the obligatory justification of their expediency. This brief review summarizes the knowledge of CBCT use in various fields of dentistry and will be useful for practicing dentists, as it is accompanied by illustrations of specific cases from practice.Документ Cytokinogenesis disorders in mechanisms of the experimental perodontitis development and their correction by flavonol(Aluna Publishing, 2022-01) Demkovych, Andrii; Bondarenko, Yurii; Hasiuk, Petro; Denefil, Olha; Zubchenko, Serhii; Kalashnikov, Dmytro; Демкович, Андрій Євгенович; Бондаренко, Юрій Іванович; Гасюк, Петро Анатолійович; Денефіль, Ольга Володимирівна; Зубченко, Сергій Григорович; Калашніков, Дмитро ВікторовичThe aim: Evaluation of changes in proinflammatory and anti-inflammatory units of the cytokine profile in the mechanisms of development of experimental bacterial-immune periodontitis and elucidation of the effect of flavonol quercetin on its parameters.Документ Dynamics of changes of c-reactive protein level in blood serum in the development and course of experimental periodontitis and their correction by flavonol(Aluna Publishing, 2022-02) Demkovych, Andrii; Hasiuk, Petro; Korobeinikova, Yuliia; Shcherba, Vitaliy; Korobeinikov, Leonid; Демкович, Андрій Євгенович; Гасюк, Петро Анатолійович; Коробейнікова, Юлія Леонідівна; Щерба, Віталій Володимирович; Коробейніков, Леонід СергійовичThe aim: To study the value of C-reactive protein in the experimental animals blood serum with bacterial-immune periodontitis and its correction with quercetin. Materials and methods: Modeling of periodontitis was performed by the following method: after thiopental anesthesia (at a dose of 40 mg / kg intramuscularly) rats were fixed. A subcostal injection of 0.01 ml of egg protein with cultures of Streptococcus hemolytic and Staphylococcus aureus at a dose of 4 CFU was performed in the area of periodontal tissues of the lower incisor as an initiating inflammatory factor. To enhance the immune process, a complete Freund’s adjuvant was introduced into the animal’s hind limb at the same time. Results: Analysis of the results of the study of the content of C-reactive protein in the blood serum of animals with experimental bacteria and immune periodontitis, receiving injections of quercetin, showed a significant decrease by 1.31 times, compared with animals with this simulated pathology on the 14th day of the experiment without the use of flavonol. When comparing this indicator on the 14th day of development of experimental periodontitis with correction, it was found that it remained slightly higher than the indicators of the intact group of rats. Conclusions: The level of C-reactive protein in the blood serum of experimental animals is an important indicator of the immune-inflammatory response, which increases its activation of the inflammatory system. The administration of flavonoid quercetin for 7 days helps to reduce the level of C-reactive protein in the blood serum of animals with experimental bacterial and immune periodontitis.Документ Examination of the patient in the clinic of orthopedic dentistry(Полтавський державний медичний університет, 2021) Kozak, R. V.; Козак, Руслан ВасильовичДокумент Hypermobility of the articular heads of the temporomandibular joint: pathology or variant of the norm?(Aluna Publishing, 2019-10) Rybalov, Oleg; Yatsenko, Pavel; Yatsenko, Oleg; Khorosh, Maksim; Korol, Dmitry; Kindiy, Dmitry; Kindiy, Victor; Рибалов, Олег Васильович; Яценко, Павло Ігорович; Яценко, Олег Ігорович; Хорош, Максим Вікторович; Кіндій, Дмитро Данилович; Кіндій, Віктор ДаниловичIntroduction: Among the large contingent of patients with TMJ dysfunctions, there are persons with hypermobility of the joint heads of the lower jaw. Moreover, at present, the question of the frequency of occurrence of hypermobility of articular heads of the TMJ is not reflected. The aim of the work is to find out the frequency of occurrence of hypermobility of articular head among a healthy population and to evaluate the clinical, radiological, and electromyographic characteristics of the muscular-articular complex in these individuals. Materials and methods: Surveys were conducted for 476 students aged 19 to 25 years. For people with revealed articular hypermobility of the articular heads, chewing and temporal muscle electromyography, TMJ aiming zonography in a lateral projection with open and closed mouth were performed with an assessment of the correspondence of the articular fossa of the temporal bone to the size of the articular head, the location of the articular heads relative to the apex of the articular tubercle. Results: Of the examined 476 students, 95 people (20%) revealed hypermobility of the articular heads of TMJ. According to the results of clinical, functional and radiological studies of TMJ, we identified three degrees of hypermobility: light, moderately expressed, significant. With light to moderate degree of hypermobility, electromyography of the temporal and chewing muscles and TMJ zonography did not reveal a difference in performance compared to healthy ones. Most of the examined did not note functional discomfort from the joints. With a significant degree of hypermobility of the articular heads, electromyography of the temporal …Документ Indications and clinical and technological stageof manufacturing artificial crowns(Полтавський державний медичний університет, 2021) Kozak, R. V.; Козак, Руслан ВасильовичДокумент Introduction to the subject: "Orthopedic dentistry": stages of development, sections, tasks, general principles, problems(Полтавський державний медичний університет, 2021) Korobejnikova, Y. L.; Коробейнікова, Юлія ЛеонідівнаДокумент Masticatory test procedure based on the use of man-made test patterns(Вищий державний навчальний заклад України «Українська медична стоматологічна академія», 2018) Korol, D. M.; Kalashnikov, D. V.; Kindiy, D. D.; Toncheva, K. D.; Zaporozhchenko, I. V.; Король, Дмитро Михайлович; Калашніков, Дмитро Вікторович; Кіндій, Дмитро Данилович; Тончева, Катерина Дмитрівна; Запорожченко, Ігор Вікторович; Король, Дмитрий Михайлович; Калашников, Дмитрий Викторович; Киндий, Дмитрий Данилович; Тончева, Екатерина Дмитриевна; Запорожченко, Игорь ВикторовичExamining the masticatory function as the significant indicator of the patients’ dental health, the authors of the given article enhanced the masticatory test procedure. Since masticatory efficiency was determined in real time mode with the uses of man-made agar masticatory patterns of standardized shape and size. With this aim the recipe of agar gel preparation was improved, and special shadowless photobox with controlled lit area and shooting distance was developed and used. As well as, a particular plugin for automatic computer processing of digital image of the acquired masticatory test fragments was created. The process of chewing man-made patterns involved 95 young volunteers. Аuthors developed and used special plugin for automated masticatory test analysis. So the suggested enhancement of the algorithm of masticatory efficiency determination allows substantial changes in the quality of dental research and practice.; Розглядаючи функцію жування як найважливіший показник стоматологічного здоров’я, автори дослідження вдосконалили методику проведення жувальної проби. При цьому динамічне визначення жувальної ефективності проводилося з використанням штучно виготовлених жувальних зразків з агар-агару стандартизованих за формою та розмірами. Для цього було максимально оптимізовано рецептуруприготування агар-агарового гелю, виготовлено та застосовано спеціальний безтіньовий фотобокс з контрольованими рівнем освітлення робочого поля та дистанцією зйомки, а також створено плагін для автоматичної комп’ютерної обробки цифрового зображення фрагментів жувальної проби. До розжовування штучних зразків було залучено 95 добровольців молодого віку, а отримані проби були зібрані, висушені та сфотографовані. Авторами було створено спеціальний плагін автоматизованого аналізу жувальних проб. Таким чином, запропоновані вдосконалення алгоритму визначення жувальної ефективності дозволяють вивести процес визначення жувальної ефективності на принципово новий, сучасний рівень медичних досліджень, якій відповідає принципам доказової медицини. ; Рассматривая функцию жевания как наиболее важный показатель стоматологического здоровья, авторы исследования усовершенствовали методику проведения жевательной пробы. При этом динамическое определение жевательной эффективности проводилось с использованием искусственно изготовленных жевательных образцов из агар-агара стандартизироанных по форме и размерам. Для этого была максимально оптимизирована рецептура приготовления агар-агарового геля, изготовлен и применен специальный бестеневой фотобокс с контролированными уровнем освещения рабочего поля и расстоянием съемки, а также создан плагин для автоматической компьютерной обработки цифрового изображения фрагментов жевательной пробы. К разжёвыванию искусственных образцов было привлечено 95 добровольцев молодого возраста, а полученные пробы были собраны, высушены и сфотографированы. Авторами был создан специальный плагин автоматизированного анализа жевательных проб. Таким образом, предложенные совершенствования алгоритма определения жевательной эффективности позволяют вывести этот процесс на принципиально новый, современный уровень медицинских исследований, соответствующих принципам доказательной медицины.Документ Materials science in orthopedic dentistry(Полтавський державний медичний університет, 2021) Korobejnikova, Y. L.; Коробейнікова, Юлія ЛеонідівнаДокумент Mathematical substantiation of the use of different types ofclammers during the restoration of the dentition with double-sided distal defects and the defect included in the frontal area by removable prosthetics(Українська медична стоматологічна академія, 2019-04-12) Kozak, R. V.; Korol, D. M.; Козак, Руслан Васильович; Король, Дмитро МихайловичThe basic conditions that ensure good functional qualities and durability of prosthetic structures from the point of view of biomechanics, undoubtedly include an optimal way of fixing a partial removable prosthesis, which consists in the correct choice of the clamping system that ensures reliable fixation of the prosthesis in the given position and at the same time causing a minimum of harm supporting teeth, as well as the most rational distribution of occlusal loads transmitted to the supporting tissues, since it is these factors that determine the durability functioning dentures.The purpose of biome-chanical studies is to analyze the stress-strain state of the supporting teeth of partial removable prostheses replacing the included and terminal defects of the dentition when fixing the prosthesis on the supporting teeth with the help of holding and supporting-retaining clamps.The studies were performed on a model of the mandible with overall dimensions of the cross section corresponding to some average dimensions.The first volumetric finite element model was developed to study the stress-strain state of periodontal ligaments of supporting teeth and supporting gingival tissues when the in-complete and bilaterial end defects of the dentition were replaced (1 class 1 subclass by Kennedy) of the mandible by a removable denture with fixation by retaining clamps on the canines and the first premolars.The second volumetric finite element model is designed to study the stress-strain state of periodontal ligaments of supporting teeth and supporting gum tissues when the included and two-sided end defects of the dentition of the lower jaw are replaced by a removable clasp prosthesis with fixation of support-retaining clamps on canines and first premolars with support arms of clamps from the distal sides of premolars.As a result of the studies performed, the following conclusions can be drawn:In both considered variants fixation of removable clasp prostheses loaded with maximum values of equivalent stresses in the pe-riodontium of the supporting teeth is localized at the apex of the alveolar ridge, which indicates the transfer of the "clutching" supporting teeth of the clasp prosthesis.The maximum values f equivalent stresses in the periodontitis of the supporting teeth during fixation of the removable clasp prosthesis by the support-retaining clamps on the canines and the first premolars exceed the corresponding values of the equivalent stresses for the case of fixing the prosthesis with retention clamps by 30-140%!With an increase in gum compliance, the values of equivalent stresses in the periodontitis of the supporting teeth during fixation of the removable clasp prosthesis by the retaining clasps vary insignificantly within 25%, and an increase in the corresponding equivalent stresses with the use of support-holding clasps may be 65%.In order to ensure the maximum sparing regimen of periodontal tissues of supporting teeth and as a result - the possibility of the most prolonged use of the prosthesis without loosening of the supporting teeth, it seems more expedi-ent to give preference to the use of clasp prostheses with the fixation of the retaining clasps.; До основних умов, які забезпечують хороші функціональні якості і довговічність протезних конструкцій з точки зору біомеханіки, безсумнівно, відноситься оптимальний спосіб фіксації часткового знімного протеза, який полягає в правильному виборі системи кламерів, що забезпечують надійну фіксацію протеза в заданому положенні і в той же час завдає мінімум шкоди опорним зубам, а також найбільш раціональний розподіл оклюзійних навантажень що передаються на опорні тканини, так як саме ці фактори визначають довготривалість функціонування знімних протезів. Метою виконуваних біомеханічних досліджень є аналіз напружено-деформованого стану опорних зубів часткових знімних протезів, що заміщають включений і кінцеві дефекти зубного ряду при фіксації протезів на опорних зубах за допомогою утримуючих та опорно-утримуючих кламерів. Дослідження виконувалися на моделі нижньої щелепи з габаритними розмірами поперечного перерізу, відповідним деяким усередненим розмірами. Перша об'ємна кінцево-елементна модель розроблена для дослідження напружено-деформованого стану зв'язок періодонта опорних зубів і опорних тканин ясен при заміщенні включеного і двостороннього кінцевого дефектів зубного ряду (1 клас 1 підклас за Кеннеді) нижньої щелепи знімним протезом з фіксацією утримуючими кламера-ми на іклах і перших премолярах. Друга об'ємна кінцево-елементна модель розроблена для дослідження напру-жено-деформованого стану зв'язок періодонта опорних зубів і опорних тканин ясен при заміщенні включеного і двостороннього кінцевих дефектів зубного ряду нижньої щелепи знімним бюгельним протезом з фіксацією опор-но-утримуючими кламерами на іклах і перших премолярах з опорними плечима кламерів з дистальних сторін премолярів. В результаті виконаних досліджень можна зробити наступні висновки: В обох розглянутих варіантах фіксації знімних бюгельних протезів навантажених максимальними значеннями еквівалентних напружень в періодонті опорних зубів локалізовані у верхівки альвеолярного гребеня, що свідчить про передачу бюгельним протезом саме "розхитуючих" опорні зуби зусиль. Максимальні значення еквівалентних напружень в періодонті опорних зубів при фіксації знімного бюгельного протеза опорно-утримуючими кламерами на іклах і перших пре-молярах перевищують відповідні значення еквівалентних напружень на відміну від випадку фіксації протеза утри-муючими кламерами на 30 - 140%! Зі збільшенням піддатливості ясен, значення еквівалентних напружень в періодонті опорних зубів при фіксації знімного бюгельного протеза утримуючими кламерами змінюються несуттєво в межах 25%, а збільшення відповідних еквівалентних напружень при використанні опорно-утримуючих кламерів може становити 65%. З метою забезпечення максимального щадного режиму тканин періодонта опор-них зубів і як наслідок - можливість найбільш тривалого користування протезом без розхитування опорних зубів в даній клінічній ситуації більш доцільним видається віддавати перевагу застосуванню бюгельних протезів з фіксацією саме утримуючими кламерами.Документ Modeling of a smile during prosthetics on implants(Полтавський державний медичний університет, 2023-10-19) Kalashnikov, D. V.; Zubchenko, S. H.; Zubchenko, Yu. P.; Ramus, M. A.; Vovk, H. R.; Калашніков, Дмитро Вікторович; Зубченко, Сергій Григорович; Зубченко, Юліана Петрівна; Рамусь, Артем Михайлович; Вовк, Гліб РомановичДокумент Modern methods of prosthesis fixed prosthetic constructions(Полтавський державний медичний університет, 2021) Ramus, M. O.; Рамусь, Михайло Олександрович